Dell Data Domain DD9500 Hardware Overview And Installation Manual Download Page 3

Page: 3 / 92

Tools and supplies needed...........................................................................12
Safety information...................................................................................... 12

Hardware Overview

System features..........................................................................................16
System specifications................................................................................. 16
DD9500/DD9800 front panel......................................................................18

Front LED indicators...................................................................... 18
Solid State Drives (SSD)................................................................21

Rear panel.................................................................................................. 22

I/O module slot assignments...................................................................... 27

Slot Addition Rules........................................................................ 29

Internal System Components..................................................................... 30

DIMM Modules.............................................................................. 32
Cooling Fans.................................................................................. 32

Storage capacity........................................................................................ 33

Install the System in the Rack

Unpack the system.....................................................................................38
Install the rack brackets............................................................................. 38

Shelf brackets and cable management assembly........................... 38
Install rail brackets on the Data Domain racks (for square or round
hole racks).....................................................................................40
Install rail brackets using the adapter hardware (for threaded hole
racks)............................................................................................ 43

Install the DD9500/DD9800 system into a rack......................................... 45
Mount the cable management assembly..................................................... 47

Install the Data Domain cable management assembly (CMA).........47

Installing the expansion shelves into the racks............................................49

Connect Cables and Power on

Connecting the expansion shelves and the controllers............................... 52

Figures

Tables

Chapter 1

Chapter 2

Chapter 3

Chapter 4

CONTENTS

Data Domain DD9500 and DD9800 Systems

6.1

Hardware Overview and Installation Guide

Summary of Contents for Data Domain DD9500





























































































Search results

Summary of Contents for Data Domain DD9500

Reviews:

Related manuals for Data Domain DD9500

Brands by name

Popular brands

Dell Data Domain DD9500, Hardware Overview And Installation Manual

Search results

Summary of Contents for Data Domain DD9500

Reviews:

Related manuals for Data Domain DD9500

Brands by name

Popular brands