10.
From the back of the computer, remove the two M2.5 x 8-mm screws.
11.
Turn the computer top-side up and open the display.
12.
Lift the display assembly out of the computer base.
Removing the Display Bezel
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the display assembly (see
Removing the Display Assembly
).
3.
Use a plastic scribe to pry the eight circular screw covers/bumpers out of the screw holes on the front of the bezel.
4.
Remove the eight screws from the front of the bezel.
1
M2.5 x 8-mm screws labeled "D" (2)
1
M2.5 x 8-mm screws (2)
CAUTION:
Before performing the following procedures, follow the safety instructions in the Product Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1
screw covers/display bumpers (8)
2
display bezel
1
screws (8)
2
display bezel
3
top cover
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
Summary of Contents for D820 - Latitude Laptop Notebook
Page 16: ...Back to Contents Page ...
Page 29: ...Back to Contents Page 1 SIM card ...
Page 37: ......
