Dell D17S Service Manual Download Page 85

Page: 85 / 106

Table 11. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology for Direct I/O.

Table 12. System setup options—Wireless menu

Wireless

Wireless Device Enable

Enable or disable internal wireless devices.

Table 13. System setup options—Maintenance menu

Maintenance

Service Tag

Display the system’s Service Tag.

Asset Tag

Create a system Asset Tag.

SERR Messages

Enable or disable SERR messages.

BIOS Downgrade

Control flashing of the system firmware to previous revisions.

Data Wipe

Enable to securely erase data from all internal storage devices.

BIOS Recovery

Enable the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.

Table 14. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Table 15. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery tool.

Overview

This section provides hardware specification for the system and contains no modifiable settings.

Table 16. BIOS Overview Page

Options

Description

Series and system model number

This field shows the following information:

●

BIOS Version - The version of the BIOS installed on the
computer.

●

Service tag - The unique 7 digit hexadecimal identification
number for the computer.

●

Asset tag

●

Manufacture Date - The date for when the unit was
manufactured.

●

Ownership Date - The date for when the unit's ownership
was transferred to the end user.

●

Express Service Code - An alternative to Service Tag, 11-
digit numerical identification number for the computer.

●

Ownership Tag

BIOS setup

Summary of Contents for D17S











































































































Search results

Summary of Contents for D17S

Reviews:

Related manuals for D17S

Brands by name

Popular brands

Dell D17S, Service Manual

Search results

Summary of Contents for D17S

Reviews:

Related manuals for D17S

Brands by name

Popular brands