Dell D17S, Service Manual

Page: 33 / 106

Next steps
1. Install the hard-drive and optical-drive bracket .
2. Install the 3.5-inch hard-drive .
3. Install the 2.5-inch hard-drive .
4. Install the front bezel .
5. Install the side cover .
6. Follow the procedure in after working inside your computer .
Solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the front bezel .
4. Remove the 2.5-inch hard-drive .
5. Remove the 3.5-inch hard-drive .
6. Remove the hard-drive and optical-drive cage .
About this task
The following images indicate the location of the M.2 2230 solid-state drive and provide a visual representation of the removal
procedure.
Steps
1. Remove the single (M2x3) screw that secures the solid-state drive to the system board.
2. Slide and lift the 2230 solid-state drive from the M.2 card slot on the system board.
Removing and installing components 33