Dell D17S Service Manual Download Page 55

Page: 55 / 106

CAUTION:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The

oils in your skin can reduce the heat transfer capability of the thermal grease.

2. Remove the

About this task

The following image indicates the location of the voltage-regulator heat sink and provide a visual representation of the removal
procedure.

Steps

1. Loosen the four captive screws that secure the voltage-regulator heat sink to the system board.
2. Lift the voltage-regulator heat sink off the system board.

Installing the voltage-regulator heat sink

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the voltage-regulator heat sink and provide a visual representation of the
installation procedure.

Removing and installing components

Summary of Contents for D17S











































































































Search results

Summary of Contents for D17S

Reviews:

Related manuals for D17S

Brands by name

Popular brands

Dell D17S, Service Manual

Search results

Summary of Contents for D17S

Reviews:

Related manuals for D17S

Brands by name

Popular brands