Installing the rear system fan
1. Hold the rear system fan by the sides with the cable end facing the bottom of the chassis.
2. Connect the two system fan cables to the system board.
3. Replace the two screws to secure the fan with the chassis.
4. Install the:
a)
b)
5. Follow the procedure in
After working inside your computer
.
Right side cover
Removing the right side cover
1. Follow the procedure in
Before working inside your computer
.
2. Place the system chassis on the side with the right side cover facing upward.
3. Remove the two screws [1], that secure the right side cover to the chassis.
4. Slide the side cover back with the handle, and then lift it away from the system [2].
Installing the right side cover
1. Slide the cover forward and ensure that the hooks on the cover snap into the notches on the system.
2. Replace the two screws that secure the right side of the cover to the chassis.
3. Follow the procedure in
After working inside your computer.
52
Removing and installing components
Summary of Contents for D04X
