Dell Chromebook 3400 Service Manual Download

Page: 10 / 108

Special keys

Increase screen brightness

Mute

Decrease the volume

Increase the volume

Search applications and the web at the same time. On a Chromebook, this key is on the side, where the Caps Lock key
is normally located.

Keyboard shortcut keys

Table 3. Shortcut keys

Shortcut keys

Function

Combination keys

Page up

Press Alt and the up arrow

Page down

Press Alt and the down arrow

Home

Press Ctrl+Alt, and the up arrow

End

Press, Ctrl+Alt and the down arrow

Delete

Press Alt+Backspace

Toggle the bookmark bar

Ctrl+Shift+B

Search current webpage

Ctrl+F

Open a new tab

Ctrl+T

Open a new window

Ctrl+N

Open the link you clicked in a new background tab

Press Alt and click a link

Switch to next tab

Ctrl+Tab

Sign out of Google Account

Ctrl+Shift+Q

Close current tab

Ctrl+W

To see more shortcuts, simply press Ctrl+Alt+? To open the keyboard viewer on your screen.

Touchpad

This page contains information for Dell touchpad gestures.
The following table lists some gestures and actions supported by the Chromebook touchpad:

Technology and components

Summary of Contents for Chromebook 3400













































































































Search results

Summary of Contents for Chromebook 3400

Reviews:

Related manuals for Chromebook 3400

Brands by name

Popular brands

Dell Chromebook 3400, Service Manual

Search results

Summary of Contents for Chromebook 3400

Reviews:

Related manuals for Chromebook 3400

Brands by name

Popular brands