Dell B3460DN Mono Laser User Manual Download Page 118

Page: 118 / 167

Change [paper source] to [custom string] load [orientation]

Try one or more of the following:

•

Load the correct size and type of paper in the tray, and then press

on the printer control panel.

Note:

Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•

Cancel the print job.

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:

•

Load the correct size and type of paper in the tray, and then press

on the printer control panel.

Note:

Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•

Cancel the print job.

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:

•

Load the correct size and type of paper in the tray, and then press

on the printer control panel.

Note:

Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•

Cancel the print job.

Close front door

Close the front door of the printer.

Complex page, some data may not have printed [39]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

•

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print
job.

•

Cancel the print job.

•

Install additional printer memory.

Defective flash detected [51]

Try one or more of the following:

•

Replace the defective flash memory card.

•

From the printer control panel, press

to ignore the message and continue printing.

•

Cancel the current print job.

Troubleshooting

118

Summary of Contents for B3460DN Mono Laser








































































































































































Search results

Summary of Contents for B3460DN Mono Laser

Reviews:

Related manuals for B3460DN Mono Laser

Brands by name

Popular brands

Dell B3460DN Mono Laser, User Manual

Search results

Summary of Contents for B3460DN Mono Laser

Reviews:

Related manuals for B3460DN Mono Laser

Brands by name

Popular brands