Dell B2360D User Manual Download Page 21

Page: 21 / 158

Use the

USB port

Attach an optional wireless network adapter.

USB printer port

Connect the printer to a computer.

Ethernet port

Connect the printer to a network.

Parallel port

Connect the printer to a computer.

Power switch

Turn on or turn off the printer.

Printer power cord socket Connect the printer to an electrical outlet.

Security slot

Attach a lock that will secure the printer in place.

These ports are available only in select printer models.

Setting up the printer software

Installing the printer software

Note:

If you installed the printer software on the computer before but need to reinstall the software, then uninstall

the current software first.

For Windows users

Close all open software programs.

Insert the

Software and Documentation

CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

Click

, or click

Start

and then click

Run

In the Start Search or Run dialog, type

D:\setup.exe

, where

is the letter of your CD or DVD drive.

Additional printer setup

Summary of Contents for B2360D































































































































































Search results

Summary of Contents for B2360D

Reviews:

Related manuals for B2360D

Brands by name

Popular brands

Dell B2360D, User Manual

Search results

Summary of Contents for B2360D

Reviews:

Related manuals for B2360D

Brands by name

Popular brands