Dell Alienware Manual Download Page 22

Page: 22 / 72

022

CHAPTER 3: CONNECTING DEVICES

Connecting a Non Plug and Play Printer

Windows Vista

Click

Start

→

Control Panel.

Click

Hardware and Sound

→

Add a printer.

Follow the instructions on the screen.

Windows

Click

Start

→

Control Panel.

Click

Hardware and Sound

→

Devices and Printers

→

Add a printer.

Follow the instructions on the screen.

For further information, see the documentation that shipped with your printer.

Connecting USB Devices

Connect USB devices into an available USB connector on your desktop. Microsoft

Windows will detect the device and attempt to install the appropriate driver

automatically. In some cases, Windows may require a driver. This driver is located

on the software CD that is included with the device.

If your keyboard or mouse has a USB connector, connect it to an available USB

connector on the desktop.

Connecting IEEE 1394 (FireWire) Devices

Connect the IEEE 1394 device into the IEEE 1394 connector on your desktop. Your

operating system will detect the device and attempt to install the appropriate

driver automatically. In some cases, Windows may require a driver. This driver is

located on the software CD that is included with the device.

For further information, see the documentation that shipped with your device.

Summary of Contents for Alienware









































































Search results

Summary of Contents for Alienware

Reviews:

Related manuals for Alienware

Brands by name

Popular brands

Dell Alienware, Manual

Search results

Summary of Contents for Alienware

Reviews:

Related manuals for Alienware

Brands by name

Popular brands