Dell Alienware M17x - GAMING LATTOP Service Manual Download Page 82

Page: 82 / 118

082

CHAPTER 18: PROCESSOR

Processor

WARNING: Before working inside your computer, read the safety

information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at

www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a

wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION: Only a certified service technician should perform repairs on

your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main

battery (see “Removing the Battery Pack” on page 11) before working

inside the computer.

Summary of Contents for Alienware M17x - GAMING LATTOP























































































































Search results

Summary of Contents for Alienware M17x - GAMING LATTOP

Reviews:

Related manuals for Alienware M17x - GAMING LATTOP

Brands by name

Popular brands

Dell Alienware M17x - GAMING LATTOP, Service Manual

Search results

Summary of Contents for Alienware M17x - GAMING LATTOP

Reviews:

Related manuals for Alienware M17x - GAMING LATTOP

Brands by name

Popular brands