Dell Alienware M17x - GAMING LATTOP Service Manual Download Page 61

Page: 61 / 118

061

CHAPTER 13: DISPLAY

Replacing the AlienHead Board

Follow the instructions in “Before You Begin” on page

Align the AlienHead board with the tabs on the display back cover. Gently

press and slide the AlienHead board into place.
Replace the screw that secures the AlienHead board to the display back

cover.
Replace the display back cover (see “Replacing the Display Back Cover” on

page 59).
Replace the display assembly (see “Replacing the Display Assembly” on

page 56).
Replace the magnesium cover (see “Replacing the Magnesium Cover” on

page 52).
Replace the left and right brackets (see “Replacing the Brackets” on page

47).

Replace the palm rest (see “Replacing the Palm Rest” on page

44).

Replace the keyboard (see “Replacing the Keyboard” on page

39).

Replace the center control cover (see “Replacing the Center Control Cover”

10.

on page 35).
Replace the compartment door (see “Replacing the Compartment Door” on

11.

page 14).
Replace the battery pack (see “Replacing the Battery Pack” on page

12.

11).

CAUTION: Before turning on the computer, replace all screws and ensure

that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Summary of Contents for Alienware M17x - GAMING LATTOP























































































































Search results

Summary of Contents for Alienware M17x - GAMING LATTOP

Reviews:

Related manuals for Alienware M17x - GAMING LATTOP

Brands by name

Popular brands

Dell Alienware M17x - GAMING LATTOP, Service Manual

Search results

Summary of Contents for Alienware M17x - GAMING LATTOP

Reviews:

Related manuals for Alienware M17x - GAMING LATTOP

Brands by name

Popular brands