Dell Alienware M17x - GAMING LATTOP Service Manual Download Page 115

Page: 115 / 118

0115

CHAPTER 26: BIOS

Advanced Menu

SATA

Operation

Allows you to configure the operating mode of the

integrated SATA hard drive controller.

ATA: SATA is configured for ATA mode.

•

AHCI: SATA is configured for AHCI mode.

•

RAID: SATA is configured for RAID mode.

•

SATA Hard

Drive 1

Displays the installed primary SATA hard drive model.

SATA Hard

Drive 2

Displays the installed secondary SATA hard drive model.

SATA Optical

Drive

Displays the installed SATA optical drive model.

Advanced Menu

High

Definition

Sound

Allows you to enable or disable the internal high definition

audio device.

Disabled: The internal audio device is disabled and is

•

not visible to the operating system.
Enabled: The internal audio device is enabled.

•

USB Emulation

Allows you to enable or disable the USB emulation

feature. This feature defines how the BIOS, in the absence

of a USB-aware operating system, handles USB devices.

USB emulation is always enabled during POST (Power On

Self Test).

NOTE:

You cannot boot any type of USB device (floppy,

hard drive, or memory key) when this option is off.

Firewire

Allows you to enable or disable the IEEE 1394 A connector.

Disabled: The IEEE 1394 A connector is disabled and is

•

not visible to the operating system.
Enabled: The IEEE 1394 A connector is enabled.

•

Performance

Options

Allows you to configure fields in the Performance Options

sub-menu (for more information, see “Performance

Options Sub-Menu“ on page 116).

Summary of Contents for Alienware M17x - GAMING LATTOP























































































































Search results

Summary of Contents for Alienware M17x - GAMING LATTOP

Reviews:

Related manuals for Alienware M17x - GAMING LATTOP

Brands by name

Popular brands

Dell Alienware M17x - GAMING LATTOP, Service Manual

Search results

Summary of Contents for Alienware M17x - GAMING LATTOP

Reviews:

Related manuals for Alienware M17x - GAMING LATTOP

Brands by name

Popular brands