Dell 5530 Mono Laser Service Manual Download Page 4

Page: 4 / 62

IO board.............................................................................................................................................................................32

Removing the IO board............................................................................................................................................. 32
Installing the IO board................................................................................................................................................34

Speakers............................................................................................................................................................................36

Removing the speakers.............................................................................................................................................36
Installing the speakers................................................................................................................................................37

Coin-cell battery...............................................................................................................................................................38

Removing the coin cell battery.................................................................................................................................38
Installing the coin cell battery................................................................................................................................... 39

Power button with fingerprint reader............................................................................................................................39

Removing the power button with fingerprint reader.............................................................................................40
Installing the power button with fingerprint reader................................................................................................41

Display assembly............................................................................................................................................................... 41

Removing the display assembly................................................................................................................................42
Installing the display assembly..................................................................................................................................43

System board................................................................................................................................................................... 45

Removing the system board.....................................................................................................................................45
Installing the system board....................................................................................................................................... 47

Palm-rest and keyboard assembly................................................................................................................................. 49

Removing the palmrest and keyboard assembly....................................................................................................49
Installing the palm-rest and keyboard assembly.................................................................................................... 50

4 Troubleshooting........................................................................................................................................... 52

Enhanced Pre-Boot System Assessment — ePSA diagnostics................................................................................52

Running the ePSA Diagnostics.................................................................................................................................52

5 Getting help.................................................................................................................................................62

Contacting Dell.................................................................................................................................................................62

Contents

Summary of Contents for 5530 Mono Laser































































Search results

Summary of Contents for 5530 Mono Laser

Reviews:

Related manuals for 5530 Mono Laser

Brands by name

Popular brands

Dell 5530 Mono Laser, Service Manual

Search results

Summary of Contents for 5530 Mono Laser

Reviews:

Related manuals for 5530 Mono Laser

Brands by name

Popular brands