•
Removing the micro-SIM card
Powering on the Dell Edge Gateway
1
Install the Gateway on the wall mount using the Dell approved
wall mounting kit
.
or
Install the Gateway on the rack infrastructure using the Dell approved
DIN-rail mounting brackets
.
2 Connect the network cable.
or
Install the wireless antenna to enable the wireless connections
3 Connect a display to the Gateway (if required).
4 Connect a keyboard and mouse if accessing the Gateway directly.
5 Connect a SELV/limited energy circuit power source to the Dell Edge Gateway.
6 Connect a grounding cable to the Gateway if required.
7
Press the power button to power on the Gateway.
8 If setting up the system for the first time, complete the operating system setup.
NOTE:
The Dell Edge Gateway is shipped with either Windows 10
Enterprise, Ubuntu Snappy, or Wind River Linux operating systems.
9 Connect and configure to devices using the RS422/RS485 ports.
NOTE:
Turn on the corresponding dip switches to enable the
corresponding RS422/R485 ports.
Mounting the Dell Edge Gateway on the wall
You can mount the Dell Edge Gateway on a wall by using mounting brackets. The
brackets secure the Dell Edge Gateway to the wall.
1
Secure the two mounting brackets to the rear of the Dell Edge Gateway by
using four screws.
Setting up your Dell Edge Gateway
16
Summary of Contents for 5000 Series
Page 21: ...4 Secure the Dell Edge Gateway by pressing the latch Setting up your Dell Edge Gateway 21 ...
Page 26: ...The Wind River operating system is setup Setting up your operating system 26 ...
Page 31: ...Features I O Module Overview 31 ...
