WARNING:
Make sure the battery is installed in a secure location and follows
all local fire codes and regulation. Read the safety instructions that is shipped
with the battery.
WARNING:
Only a trained technician should setup/replace the battery.
WARNING:
Only install the battery inside an enclosure that meets fire safety
requirements.
WARNING:
Only Sealed Lead Acid (SLA) battery rated 50Ah (or less) should be
used
WARNING:
During installation, before connecting a 24V Power or 19.5V
power source, install a 15A or 20A circuit breaker or fuse on the mains power
distribution circuit-panel circuit.
Wiring Design Procedure
NOTE:
It is recommended that the cable connecting the power module to the
battery be able to carry 15 A of current as per the AWG standards.
NOTE:
It is recommended to include a 15 A breaker/fuse between the Power
Module and the battery.
Power Module Overview
48
Summary of Contents for 5000 Series
Page 21: ...4 Secure the Dell Edge Gateway by pressing the latch Setting up your Dell Edge Gateway 21 ...
Page 26: ...The Wind River operating system is setup Setting up your operating system 26 ...
Page 31: ...Features I O Module Overview 31 ...
