10
Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before working inside your computer
. After working inside
your computer, follow the instructions in
After working inside your computer
. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Remove the
top cover
.
Procedure
1.
Remove the screws that secures the mobile broadband card and bracket to the system board.
2.
Lift the bracket off the system board.
3.
Disconnect the antenna cables from the mobile broadband card.
4.
Slide and remove the mobile broadband card out of the mobile broadband card slot.
19
Summary of Contents for 5000 Series
