Dell 2230 User Manual Download

Page: 47 / 128

Light sequences

What you can do

Complex page, some data may not have printed

- On

•

Simplify the page by reducing
the amount of text, graphics,
fonts, or macros.

•

Set

Page Protect

to On.

•

Print the page that may not have
printed. For more information,
see “Print Recovery” on
page 26.

•

Install additional printer
memory. For more information,
see “Installing a memory card”
on page 34.

Insufficient memory to collate job

- On

•

Press

to collate the remaining

pages of the job.

•

Press

to cancel the print job.

•

Simplify the page by reducing
the amount of text, graphics,
fonts, or macros.

•

Install additional printer
memory. For more information,
see “Installing a memory card”
on page 34.

Insufficient memory to support Resource Save feature

- On

- Blinking

- On

Install additional printer memory.
For more information, see
“Installing a memory card” on
page 34

Interpreting the printer control panel lights

Summary of Contents for 2230

































































































































Search results

Summary of Contents for 2230

Reviews:

Related manuals for 2230

Brands by name

Popular brands

Dell 2230, User Manual

Search results

Summary of Contents for 2230

Reviews:

Related manuals for 2230

Brands by name

Popular brands