Dell 2150 Color Laser, User Manual

Page: 65 / 495

Installing Optional Accessories
63
5 Ensure that
WPS
is displayed, and then press the (Set) button.
6 Press button until
PIN Code
appears, and then press the (Set)
button.
7 Write down the 8-digit PIN code displayed on the panel or press button
until
Print PIN Code
appears, and then press the (Set) button.
The PIN code is printed.
8 Ensure that
Start Config.
is displayed, and then press the (Set)
button.
9 Ensure that the message
Please wait Wireless Setting
is
displayed, and enter the PIN code displayed on the step 7 into the wireless
LAN access point (Registrar).
NOTE:
For WPS operation on the wireless LAN access point, refer to the
manual supplied with the wireless LAN access point.
10 When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
WPS-PBC
You can start Push Button Control only from the operator panel.
NOTE:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a
method to authenticate and register devices required for wireless configuration, by
pressing the button provided on the access point via wireless routers, and then
performing WPS-PBC setting on the operator panel. This setting is available only
when the access point supports WPS.
1 Press the (Menu) button.
2 Press button until
Admin Menu
appears, and then press the (Set)
button.
3 Press button until
Network
appears, and then press the (Set)
button.
4 Press button until
Wireless Setup
appears, and then press the
(Set) button.
5 Ensure that
WPS
is displayed, and then press the (Set) button.
6 Ensure that
Push Btn. Ctrl
is displayed, and then press the (Set)
button.