manualshive.com logo in svg

Dell 1RK32-0B2, Getting Started Manual

Share
Download
Dell 1RK32-0B2 Getting Started Manual Download Page 50

 

                                  Dell - Restricted - Confidential 

4 

•

 

When using a Fiber Optic Small-Form Pluggable (SFP) module, ensure it is IEC 60825 certified. 

Lithium battery warning 

The Lithium Battery used in the Dell Safeguard 5242LR Internet security appliance may not be replaced by the user. The 
appliance must be returned to a Dell authorized service center for replacement with the same or equivalent type recommended 
by the manufacturer. If, for any reason, the battery or Dell Safeguard 5242LR Internet security appliance must be disposed of, do 
so following the battery manufacturer's instructions. 

Cable connections 

All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not connect these 
ports directly to communication wiring or other wiring that exits the building where the Dell Safeguard 5242LR is located.   

Sicherheitsanweisungen 

Für eine ordnungsgemäße Montage sollten die folgenden Hinweise beachtet werden: 

•

 

Das Dell SMA Modell ist für eine Montage in einem standardmäßigen 19-Zoll-Rack konzipiert. 

•

 

Vergewissern Sie sich, dass das Rack für dieses Gerät geeignet ist und verwenden Sie das vom Rack-Hersteller empfohlene 
Montagezubehör. 

•

 

Stellen Sie sicher, dass das Gerät vor Wasser und hoher Luftfeuchtigkeit geschützt ist. 

•

 

Stellen Sie sicher, dass die Luft um das Gerät herum zirkulieren kann und die Lüftungsschlitze an der Seite des Gehäuses 
frei sind. Hier ist ein Belüftungsabstand von mindestens 26 mm einzuhalten. 

Summary of Contents for 1RK32-0B2


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands