Dell - Restricted - Confidential
2
For rack mounting instructions, refer to
Rack mounting the appliance
on page
37
.
To connect the Safeguard 5242LR appliance:
1
Connect a network cable from your internal network to the internal interface on the appliance (X0).
2
Optionally, connect a cable from your external network to the external interface on the appliance (X1).
Starting the appliance
The Safeguard 5242LR includes dual power supplies for redundant AC power and added reliability. Two power cords are included
with the Safeguard 5242LR appliance. Refer to
Safety and regulatory information
on page
45
for information.
The included power cord(s) are approved for use only in specific countries or regions. Before using a power cord, verify that it is
rated and approved for use in your location.
For the Safeguard 5242LR, plug the power cords to the power supply sockets on the appliance back and then connect the cords
to AC outlets. For best reliability, connect the two cords of the Safeguard 5242LR to outlets on different circuits.
CAUTION:
Remove any USB devices from the
appliance before you reboot it. If a USB device is
plugged in to your appliance when it is rebooted, the
appliance tries to use it as a boot device. As a result,
the boot information stored in the BIOS on the
appliance is overwritten, and the device becomes
unusable.
Summary of Contents for 1RK32-0B2
