Dell 1dw User Manual Download Page 92

Page: 92 / 150

Right-click the name of your printer.

Click

Properties

Click the

Ports

tab, and then click

Add Port

Select

Local Port

, and then click

New Port

Type the

Universal Naming Convention (UNC) Port name

, which consists of the server name and the

distinctive printer name that was specified in step 2 on page 91. The name should be in the form

\\server

\printer

Click

Close

on the Printer Ports dialog.

Make sure the new port is selected on the Ports tab, and then click

Apply

The new port is listed with the printer name.

Click

Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet

network

To configure your printer for an Ethernet network, organize the following information before you begin:

Note:

If your network automatically assigns IP addresses to computers and printers, continue on to installing the

printer.

•

A valid, unique IP address for the printer to use on the network

•

The network gateway

•

The network mask

•

A nickname for the printer (optional)

Note:

A printer nickname can make it easier for you to identify your printer on the network. You can choose to

use the default printer nickname, or assign a name that is easier for you to remember.

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can
physically connect to the network. Use a new network cable when possible to avoid potential problems caused by
a damaged cable.

Installing the printer on an Ethernet network

Before you install the printer on an Ethernet network, make sure that:

•

You have completed the initial setup of the printer.

•

Your network is set up and working properly.

•

Your computer is connected to your network.

Close all open software programs.

Insert the installation software CD.

Networking

Summary of Contents for 1dw























































































































































Search results

Summary of Contents for 1dw

Reviews:

Related manuals for 1dw

Brands by name

Popular brands

Dell 1dw, User Manual

Search results

Summary of Contents for 1dw

Reviews:

Related manuals for 1dw

Brands by name

Popular brands