8
Press the
Color/Black
button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
9
Press
.
Note:
For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Editing photos using the printer control panel
1
Load photo paper.
2
Insert a memory card or flash drive.
If document files and image files are stored on the memory device, then press
to select
Photos
.
3
From the printer control panel, press
to select
Select and Print
.
4
Press the left or right arrow button to select the layout of the photo you want to print, and then press
.
5
Press the left or right arrow button to select a photo for editing and printing.
6
Press the up or down arrow button to scroll to
, and then press
.
From here
You can
Brightness
Adjust the brightness of a photo.
Crop
Crop a photo.
Auto Enhance
Enhance a photo automatically.
Reduce Red Eye
Reduce the red-eye effect caused by light reflection.
Rotate
Rotate a photo in 90-degree increments clockwise or counterclockwise.
Colorized Effect
Select whether to print a photo in black and white, sepia, antique brown, or
antique gray.
Frames
Select a frame for the photo.
7
Press the arrow buttons to make your selections.
8
Press the up or down arrow button to scroll to
, and then press
.
9
Press the up or down arrow button to scroll to
, and then press
.
10
If you want to adjust the print settings:
a
Press
again.
b
Press the arrow buttons to make your selections.
c
Press
to save your selections.
d
Press the up or down arrow button to scroll to
Continue
, and then press
.
11
Press the
Color/Black
button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
12
Press
.
Note:
For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing
37
