Dell 1100MP, Owner'S Manual

Page: 20 / 978

www
.dell.com | support.dell.com
20
Using Your Projector
Management Menu
M
ENU
L
OCATION
—
Select the location of the
OSD on the screen.
P
ROJECTION
M
ODE
—
Select how the image
appears:
• Front Projection-Desktop (the default).
• Rear Projection-Desktop — The
projector reverses the image so you can project
from behind a translucent screen.
•
Front Projection-Ceiling Mount — The
projector turns the image upside down for
ceiling-mounted projection.
•
Rear Projection-Ceiling Mount — The
projector reverses and turns the image upside
down. You can project from behind a
translucent screen with a ceiling-mounted
projection.
S
IGNAL
T
YPE
— Manually select the signal type (RGB, YCbCr, or YPbPr)
L
AMP
H
OUR
— Displays the operating hours since the last timer reset.
L
AMP
R
ESET
— After you install a new lamp, select
Yes
to reset the lamp timer.
P
OWER
S
AVING
— Select
Yes
to set the power saving delay period. The delay period is
the amount of time you want the projector to wait without signal input. After that
set time, the projector enters power saving mode and turns off the lamp. The
projector turns back on when it detects an input signal or you press the
Power
button. After two hours, the projector turns off and you need to press the
Power
button to turn the projector on.
O
SD
L
OCK
—
Select
Yes
to enable the
OSD Lock
for hiding the OSD menu. (Or
pressing the button on the control panel or the Menu button on the remote
control for 15 seconds).
A UTO S OURCE — Select
On
(the default) to autodetect the available input signals.
When the projector is on and you press
Source
, it automatically finds the next
available input signal. Select
Off
to lock the current input signal. When Off is
selected and you press
Source,
you select which input signal you want to use.
E CO M ODE — Select
On
to use the projector at a lower power level (150 Watts),
which may provide longer lamp life, quieter operating, and dimmer luminvance
output on the screen. Select
Off
to operate at noraml power level (200 Watts).
O
SD
T
IMEOUT
— Use this function to set the duration OSD menu stay active
(at idle state).