Template Last Updated - 2/7/2007
Using Your E-Monitor Stand
7
DELL CONFIDENTIAL – PRELIMINARY 7/22/08 - FOR PROOF ONLY
Using Your E-Monitor Stand
CAUTION:
Before you begin any of the procedures in this section, follow the
safety information that shipped with your computer.
NOTICE:
The monitor stand supports a CRT with a base footprint of up to 19" or a
flat panel monitor with a base footprint of up to 20". Heavier or larger monitors may
damage the stand, laptop, or port replicator.
Connecting the E-Monitor Stand to E-Port or E-
Port Plus Port Replicators
1
With the front of the port replicator raised slightly, slide the port replicator
toward the back of monitor stand until the port replicator rests against the
guide posts.
2
Push down on the port replicator to secure it to the release tab on the
monitor stand.
