Serial connector
The VxRail P Series, V Series, and S Series appliances supports one serial connector
on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE),
16550-compliant.
Internal Dual SD Module
The VxRail P Series, V Series, and S Series appliances support Internal Dual SD
module (IDSDM). The IDSDM is located at the back of the appliance, in a Dell-
proprietary slot. IDSDM card supports two micro SD cards. Micro SD cards capacity
for IDSDM are 64 GB.
Note
The IDSDM on the VxRail appliances is pre-configured for appliance bare metal
recovery. It is not recommended to change any of the settings.
Video specifications
The VxRail P Series, V Series, and S Series appliances supports integrated Matrox
G200eW3 graphics controller with 16 MB of video frame buffer.
This table describes the supported video resolution options:
Table 21 Supported video resolution options
Resolution
Refresh rate (Hz)
Color depth (bits)
1024 x 768
60
8, 16, 32
1280 x 800
60
8, 16, 32
1280 x 1024
60
8, 16, 32
1360 x 768
60
8, 16, 32
1440 x 900
60
8, 16, 32
1600 x 900
60
8, 16, 32
1600 x 1200
60
8, 16, 32
1680 x 1050
60
8, 16, 32
1920 x 1080
60
8, 16, 32
1920 x 1200
60
8, 16, 32
Note
1920 x 1080 and 1920 x 1200 resolutions are only supported in reduced blanking mode.
Environmental specifications
When the appliance is in continuous operation (for altitude less than 950 m or 3117 ft),
the temperature specification ranges from 10°C to 35°C (50°F to 95°F) with no
direct sunlight on the equipment. When the appliances is not in operation, the
Technical specifications
Serial connector
31
