Removing the optical or tape drive blank
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
If installed,
.
Steps
1
To remove the drive blank, slide the release latch down to release the drive blank.
2
Push the drive blank to slide it out of the drive bay.
NOTE:
Blanks must be installed on empty optical drive or tape drive slots to maintain FCC certification of the system.
The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system. Perform
the same steps to install blanks.
Figure 55. Removing the optical drive or tape drive
Next step
1
Install the
,
an optical drive, or a tape drive
.
Installing the optical or tape drive blank
Prerequisites
1
Follow the safety guidelines listed in
2
If installed,
.
102
Installing and removing system components
Summary of Contents for PowerEdge T640
Page 23: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 23 ...
Page 24: ...Figure 17 Electrical overview 24 Dell EMC PowerEdge T640 overview ...
Page 25: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 25 ...