Table 6. Rear view of the system
Item
Ports, panels, or slots
Icon
Description
1
Power supply unit (PSU 1)
For more information about the PSU configurations, see the
2
PCIe expansion card riser
(slot 1)
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion
cards that are supported on your system, see
3
PCIe expansion card riser
(slot 4)
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion
cards that are supported on your system, see
4
USB 2.0 port (1)
This port is USB 2.0-compliant.
5
Power supply unit (PSU 2)
For more information about the PSU configurations, see the
6
VGA port
Enables you to connect a display device to the system. For more
information, see the
section.
7
USB 3.0 port (1)
This port is USB 3.0-compliant.
8
iDRAC dedicated port
Enables you to remotely access iDRAC. For more information,
see the iDRAC User’s Guide at
.
9
System identification
button
Press the system ID button:
•
To locate a particular system within a rack.
•
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
• To reset iDRAC using system ID, ensure that the
system ID button is enabled in the iDRAC setup.
• If the system stops responding during POST, press
and hold the system ID button (for more than 5
seconds) to enter the BIOS progress mode.
10
OCP NIC port (optional)
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
11
NIC port (2)
The NIC ports are embedded on the LOM card that is
connected to the system board.
For more information about the ports, see the
System overview
13
