Steps
1
Remove the four screws securing the SSD cage to the chassis.
2
Holding the SSD cage by its edges, lift it away from the sled.
Figure 38. Removing an SSD cage
1
chassis
2
guide pin slot (4)
3
SSD cage
4
screw (4)
5
guide pin (4)
Next steps
1
Install the SSD cage.
2
Install the SSD(s).
3
Reconnect the USB devices.
4
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing an SSD carrier
Installing the SSD cage
After working inside your system
Installing the SSD cage
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Installing and removing sled components
93
