NOTE:
If the file name contains special characters, you must enclose the file path within escaped double quotation marks.
Command examples
•
update emm -a = 500abcdefgh12345 -enc = 1 -emm = 0 -file = C:\Users\Administrator\firmwares
\emm_upgrade.esm
•
update emm -enc = 500rg67890123456 -emm = 500a123456789012 -file = C:\Users\Administrator
\firmwares\emm_upgrade.esm
•
update emm -emm = 500a123456789012 -file = C:\Users\Administrator\firmwares\emm_upgrade.esm
Update Adapter
Description
After running the following command, the updated firmware file’s version is installed.
Command syntax
shmcli (update adapter | updateadapter) ( -a=<(SAS WWID | AdapterIndex)> -file=<FW.FilePath> |
[-h])
Parameters
Table 27. Update Adapter
Parameter
Description
-h, -help
Provides more information about the command, description, and
usage.
-outputformat
Following output formats can be specified: XML, JSON.
-a, -adapter
Specifies the adapter to be used for the command. This can either
be the SAS WWID or the Adapter Index.
-file
Specifies the file at the given path used for the command.
NOTE:
If the filename contains special characters, you must enclose the file path within escaped double quotation marks.
Status Adapter
Description
Shows information about the specified adapter status including PHY and expander information.
Command syntax
shmcli (status adapter | statusadapter | sa) (-a=<(SAS WWID | AdapterIndex)> [-
outputformat=<supportedOutputFormats>] | [-h])
Parameters
Table 28. Status Adapter
Parameter
Description
-h, -help
Provides additional information about the command, description,
and usage.
-outputformat
Following output formats can be specified: XML, or JSON.
-a, -adapter
Specifies the Adapter to be used for the command. This can either
be the SAS WWID or the Adapter Index.
Update commands
39
