Parameters
Table 22. Firmware File information
Parameter
Description
-file
Specify the file at the given path used for the command.
-outputformat
You can specify the following output formats: XML or JSON.
-h
Provides more information about the command, description, and
usage.
NOTE:
If the filename contains special characters, you must enclose the file path within escaped double quotation marks.
View event log
Description
View all or part of the contents of the event log file based on date range and logging level.
Command syntax
shmcli (view log | vlog) ([-startDate=<StartDate> -endDate=<EndDate> -event=<EventType>] | [-
event=<EventType> -count=<LatestEventCount>] | [-h])
Parameters
Table 23. View event log
Parameter
Description
-h
Provides more information about the command, description, and usage.
-startDate
Display logs recorded on or after this date. Acceptable format is MM/DD/YY.
-endDate
Display logs recorded no later than this date. Acceptable format is MM/DD/YY.
-count
Display the latest number of events of a specified category. The viewable count of latest events can be a
value from 1 to 1000.
-event
Display logs of the given event severity type. This could be either of the following: INFO, CRITICAL,
ERROR, or WARN. Logs are printed irrespective of the severity level, if this argument is not provided.
View MD3060e SAS diagnostics
Description
Displays a list of SAS diagnostic information associated with the supplied enclosure.
CLI reference
35
