Dell EMC Latitude 7520 Service Manual Download Page 96

Page: 96 / 96

Getting help

Topics:

•

Prerequisites

NOTE:

If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing

slip, bill, or Dell product catalog.

About this task

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and
some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

Steps

1. Go to

Dell.com/support

2. Select your support category.
3. Verify your country or region in the

Choose a Country/Region

drop-down list at the bottom of the page.

4. Select the appropriate service or support link based on your need.

Getting help

Summary of Contents for Latitude 7520

































































































Search results

Summary of Contents for Latitude 7520

Reviews:

Related manuals for Latitude 7520

Brands by name

Popular brands

Dell EMC Latitude 7520, Service Manual

Search results

Summary of Contents for Latitude 7520

Reviews:

Related manuals for Latitude 7520

Brands by name

Popular brands