Figure 90. Removing expansion card from the expansion card riser
4. If the expansion card is not going to be replaced, install a filler bracket and close the card retention latch.
Figure 91. Installing the filler bracket
Next steps
1. If applicable,
install an expansion card into the expansion card riser
.
Installing an expansion card into the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in the
on page 26.
2. Follow the procedure listed in
Before working inside your system
3. If installing a new expansion card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
Steps
1. Pull and lift up the expansion card retention latch lock to open.
Installing and removing system components
117
