68
for user, it will check the firmware checksum and signature, and the wrong
firmware won’t be accepted. After upgrading, the device will reboot and
please note that depends on the version of firmware, the upgrading may
cause the device configuration to be restored to the factory default setting,
and the original configuration data will be lost!
To upgrade firmware, just assign the file name with full path then click
“Upload” button as the following page.
Memory Limitation
To make sure the device have enough memory to upload firmware, the
system will check the capacity of free memory, if the device lack of
memory to upload firmware, please temporarily turn-off some functions
then reboot the device to get enough memory for firmware uploading.
Configuration Data Backup & Restore
Rest Setting to Factory Default Value
Since the device is designed for outdoor used, there is no interface
outside the housing to reset the configuration value to the factory default
value. The device provides the Web-Browser interface to rest the
configuration data. After resetting it, the current configuration data will be
lost and restored to factory default value.
Saving & Restoring Configuration Data
To save & restore configuration data of device, just assign the target
filename with full path at your local host, then you can backup
Summary of Contents for DLB2300
Page 26: ...25 refresh the RSSI please use Site Survey page to re connect a AP ...
Page 40: ...39 Changes button to take effective ...
Page 48: ...47 ...
Page 64: ...63 ...