Deliberant DLB2300, User Manual

Page: 6 / 71

5
Ch 1. Device Installation
Packing List
Before you start to install the ODU, make sure the package contains the
following items
●
Wireless Outdoor Bridge unit * 1
●
Mounting Kit * 1
●
Power Over Ethernet Kit * 1
Ch 2. First Time Configuration
Before Start to Configure
There are two ways to configure the device, one is through web-browser, and
the other is through Secure Shell CLI interface. To access the configuration
interfaces, make sure you are using a computer connected to the same
network as the device. The default IP address of the device is 192.168.2.254,
and the subnet-mask is 255.255.255.0.
The device has three operation modes (Router/Bridge/WISP). In bridge mode,
also known as AP Client, you can access the device by both WLAN (Wireless
Local Area Network) and wired LAN. And in router/WISP modes, the device
can be accessed by both WLAN and WAN. The default IP addresses for the
device are 192.168.2.254(for LAN), 172.1.1.1(for WAN), so you need to make
sure the IP address of your PC is in the same subnet as the device, such as
192.168.2.X (for LAN), 172.1.1.X (for WAN).
Please note that the DHCP server inside the device is default to up and
running. Do not have multiple DHCP servers in your network environment,
otherwise it will cause abnormal situation.
We also provide an auto-discovery tool which is for finding out the IP of the
device. In case, you’ve forgot the IP of the device or the IP of the device has
been changed, you can use the tool to find out the IP of the device even your