24
Delfield
STANDARD LABOR GUIDELINES TO REPAIR OR REPLACE
PARTS ON DELFIELD EQUIPMENT UNDER WARRANTY
Advice and recommendations given by Delfield Service
Technicians do not constitute or guarantee any special
coverage.
A maximum of 1 hour is allowed to diagnose a defective
component.
A maximum of 1 hour is allowed for retrieval of parts not
in stock.
A maximum travel distance of 100 miles round trip and
2 hours will be reimbursed.
Overtime, installation/start-up, normal control
adjustments, general maintenance, glass breakage,
freight damage, and/or correcting an end-user installation
error will not be reimbursed under warranty unless pre-
approved with a Service Work Authorization from Delfield.
You must submit the number with the service claim.
LABOR OF 1 HOUR IS ALLOWED TO REPLACE:
• Solenoid Coil
• Hi-limit/Thermal Protector Switch
• Compressor Start Components and Overload
Protector
• Evaporator/Condenser Fan Motor and Blade
• Door Hinges, Locks and Gaskets
LABOR OF 2 HOURS TO REPLACE:
• Drawer Tracks/Cartridges
• Pressure Control
• Microprocessor Control
• Solenoid Valve
• Locate/Repair
LABOR OF 3 HOURS TO REPLACE:
• Expansion Valve
• Condenser or Evaporator Coil
LABOR OF 4 HOURS TO REPLACE:
Compressor
This includes recovery of refrigerant and leak check.
$55.00 maximum reimbursement for refrigerant recovery
(includes recovery machine, pump, torch, oil, flux, minor
fittings, solder, brazing rod, nitrogen, or similar fees.)
Refrigerants
R404A A maximum of $12.00/lb. or 75¢/oz.will be
reimbursed.