200 and 300 Series Service and Installation Manual
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
2
The serial number on all Model 225 and 227 units is located
on the tag affixed next to the temperature control, inside the
compressor stand at the bottom of the unit.
Always have the serial number of your unit available when call-
ing for parts or service.
©2003 The Delfield Company. All rights reserved. Reproduction without
written permission is prohibited. “Delfield” is a registered trademarks of
The Delfield Company.
CONTENTS
SERIAL NUMBER INFORMATION
SPECIFICATIONS
RECEIVINg AND INSPECTINg THE EqUIPMENT
RECEIVING & INSPECTING EQUIPMENT..................................2
SPECIFICATIONS ........................................................................2
INSTALLATION ..........................................................................3
OPERATION ................................................................................4
MAINTENANCE ..........................................................................4
WIRING DIAGRAM.....................................................................8
STANDARD LABOR GUIDELINES ..............................................9
REPLACEMENT PARTS LIST ..................................................5-8
STANDARD WARRANTY .....................................................10-11
PARTS DEPOTS ........................................................BACK PAGE
Even though most equipment is shipped packaged, care
should be taken during unloading so the equipment is not
damaged while being moved into the building.
1. Visually inspect the exterior of the package and skid or
container. Any damage should be noted and reported to
the delivering carrier immediately.
2. If damaged, open and inspect the contents with the
carrier.
3. In the event that the exterior is not damaged, yet upon
opening, there is concealed damage to the equipment
notify the carrier. Notification should be made verbally
as well as in written form.
4. Request an inspection by the shipping company of the
damaged equipment. This should be done within 10
days from receipt of the equipment.
5. Visually inspect the refrigeration package. Be sure lines
are secure and base is still intact.
6. Freight carriers can supply the necessary damage forms
upon request.
7. Retain all crating material until an inspection has been
made or waived.
MODEL
OVERALL
CUTOUT
CABINET
DESIGN SYSTEM
NUMBER L
D
H
SIZE
CAPACITY H.P. AMP
LOAD BTU CAP. BTU
DROP-IN FREEZERS
N225
16.56” 27.87” 26.75” 25.75” x 14.62” 6 gal.
1/5 5.0
292
569
N227
30” 27.87” 26.75” 25.75” x 28.00” 12 gal. 1/5 5.0
473
661
DROP-IN FREEZERS WITH LEXAN
®
LID
225L
16.56” 27.87” 26.75” 25.75” x 14.62” 6 gal.
1/5 5.0
292
569
227L
30” 27.87” 26.75” 25.75” x 28.00” 12 gal. 1/5 5.0
473
661
MODEL
OVERALL
CUTOUT
ICE
NUMBER DESCRIPTION
L
D
H
SIZE
CAPACITY
DROP-IN WATER STATIONS AND ICE STORAgE
203
ice chest
20.25” 20.25” 23.25” 19.25” x 19.25” 90 lbs.
204
water and ice station 24”
21” 23.5” 21” x 17.75”
45 lbs.
240
ice chest with cover 21” 17.5” 17”
—
75 lbs.
248
water and ice station 31”
15” 22.5”
28” x 12.5”
45 lbs.
305
ice chest with cover 21.25” 15.25” 13” 17.75” x 13.25” 45 lbs.
307
glass filler
12”
12” 9.5”
—
—
UNDERCOUNTER SINKS, WATER STATIONS AND ICE STORAgE
242
UC sink & faucet
18” 13.5” 12.75” 17” x 12.5”
—
250
UC sink, ice chest
46” 14.12” 22.75”
45” x 13”
45 lbs.
and water station
