INTRODUCCIÓN
Su radio XTA-2000 y el radio de CD XTA 2400 de Delco Electronics
®
fueron diseña-
dos para un funcionamiento fácil que le hará disfrutar muchos años de excelente
sonido. Para aprovechar al máximo el placer de este radio, lea este manual e
infórmese de sus funciones antes de usarlo. Descubra qué puede hacer el radio y
cómo operar todos los controles para asegurarse que esté obteniendo el máximo
rendimiento de esta tecnología de avanzada con la cual está equipado.
Radio XTA-2000 de Delco Electronics
Botón
Función
Página
1. BAND (Banda)
Cambia entre AM, FM1, FM2, WX (información
meteorológica), Satélite 1, y Satélite 2
(si así está equipado) . . . . . . . . . . . . . . . . . . . . . . . . .29
2. PWR
Encendido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
(Encendido)
3. ON/AUDIO
Configuraciones de encendido/volumen/radio . . . . . .27
(Encendido/audio)
4. DISPL/TM SET
Cambia display/interruptores a modo de
(Ajuste del
ajuste de la hora . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
display/hora)
5. TUNE/SEEK
Cambia de estación de radio . . . . . . . . . . . . . . . . . . .29
(Sintonizar/buscar)
6. Botones a
Programan estaciones . . . . . . . . . . . . . . . . . . . . . . . .29
presión 1-6
7. AUTO
Guarda en memoria las estaciones de mejor
(Automático)
recepción a estaciones programadas . . . . . . . . . . . .29
8. DIM
Regula el brillo del display . . . . . . . . . . . . . . . . . . . . .28
(Atenuador)
9. SCAN
Explora todas las estaciones de la banda actual . . .29
(Exploración)
1
4
2
3
5
6
7
8
9
25
8
2. Press Preset 1 until the type of programming you want to listen to (rock,
classical, etc.) appears on your radio display.
3. Press the
s
TUNE/SEEK
t
button to select a station of the program type
you selected in step 2. Continue to press the
s
TUNE/SEEK
t
button to
move through the list of stations available and select a station in that
progam type. Station names will appear on the radio display.
You can also scan stations by program type. After you have selected a Program
Type:
1. Press SCAN to scan all of the program type’s available stations.
2. Press SCAN again to stop scanning.
Using the Compact Disc Player (XTA-2400 Only)
The integral CD player will play full size CDs.
Playing a Compact Disc
1. Turn the ignition and receiver on.
2. Insert a disc partway into the slot, label side up. The player will
automatically pull the disc in once it has been partially inserted. The
“CD” icon will appear on the display along with the track number and
elapsed time, and the disc will begin to play.
3. If you are listening to the radio, press the CD button
to play a CD that has been loaded into the player. If no CD has been
loaded, the display will show “NO CD” for five seconds and return to the
default display. If a CD has been loaded, the display will show the track
number and the elapsed time on the track.
If a CD is ejected and not removed within 25 seconds, the CD will reload.
A CD can be inserted while the receiver is off. To do so, press Eject
and insert a CD within 25 seconds.
Troubleshooting
The following error messages may appear while in the CD Player mode:
NO CD:
No CD has been loaded in the player.
FOCUS:
Lens could not focus on CD. Possible reasons include:
Disc is inserted upside down – eject and reinsert CD.
Disc is dirty, scratched, or wet – try cleaning CD.
Lens is dirty - clean CD lens with a lens cleaner.
It is very humid – wait an hour and try again.
TRACKING: Loss of tracking control. Possible reasons include:
Disc is dirty or scratched – try cleaning CD.
Lens is dirty – clean CD lens with a lens cleaner.
MOTOR ER: Load/unload motor problem – contact dealer.
