• Check that the flush tube is not pushed right up against
the ceramic, and that the flush tube elbow has a minimum bend
radius of 50mm.
No flush:
• Supply pressure is too weak, the pipe work is too small,
or the flush tube is at 90°.
BEWARE: DO NOT grease the inside of the mechanism.
NB: Check the integrity of the seals between the stainless steel wall
plate and the wall and the wall plate and the valve at least once a year
and make good if necessary.
MAINTENANCE & CLEANING
•
Cleaning chrome and stainless steel:
do not use abrasive, chlorine
or any other acid-based cleaning products.
Clean with mild soapy water using a cloth or a sponge.
•
Frost protection:
drain the pipes and operate the valve several times
to drain any remaining water. In the event of prolonged exposure
to frost, we recommend taking the mechanisms apart
and storing them indoors.
EN
After Sales Care Support:
For the UK market only: Tel.
01491 821 821 -
email:
The installation guide is available on: www.delabie.co.uk
For all other markets: Tel.
+33 (0)3 22 60 22 74 -
email:
The installation guide is available on: www.delabie.com
Summary of Contents for NT 760
Page 2: ...400 mini R50 mini 400 mini R50 mini A B C D E F G H 1 mm ...
Page 27: ......
Page 28: ......
