16
Installation
WI-KEY INSTALLING THE CONTROL BOX
- It must be located in a place from which it is possible to check
that no one enters the pool during the manoeuvre.
- It is mandatory to install the locking «strip».
- Before fixing the control box, check that the emitter is
communicating with the receiver.
”if the motor does not run => check the power supply polarity
The support must be attached to a fixed support
Closing
Opening
Stops the current action
Keyboard lock
red / green flashing = emitter locked
Emitter unlocking procedure see «page 27»
The emitter must be located outside volume 0.
The distance between the emitter and the receiver must not exceed:
- 50 m in an obstacle-free zone.
- 25 m behind a basic wall.
- 15 m behind several walls or an especially thick wall.
We recommend checking emitter/receiver communication before fixing permanently.
Summary of Contents for TIXIT
Page 11: ...11 x2 x2 M4x10 2 5 ASSEMBLING THE REAR GUARD I n s t a l l a t i o n...
Page 12: ...12 2 1 3 4 F C O I n s t a l l a t i o n WIRING SOLAR VERSION WI KEY OPTION...
Page 14: ...14 2 1 3 4 I n s t a l l a t i o n WIRING SOLAR VERSION OPTION...
Page 28: ...28 U s e LOCKING AND RELEASING PUSH LOCK Locking Releasing...