15
2 1
3
4
34 cm
25
cm
14 cm
Installation
WIRING - ELECTRIC VERSION
OPTION
230 V Power supply
The electric control box must be fitted in a dry room.
The installation must comply with the NF C15-100 standard.
et CEI 60364
(Last applicable version) ask your electrician for advice or contact your electricity provider.
All our control boxes use a 230 Volt single phase (50Hz) power supply.
The required power at the input terminals is 0.15 Kw.
Upstream from the control box a suitably sized circuit breaker with a 30 mA ground fault device must be
provided.
(U1000RO2V in a sheath) compliant with applicable standards
2 x 4 mm² - up to 16 m in length.
2 x 6 mm² - from 16 to 25 m in length.
+ 2 x 1 mm² - STOP SEL OPTION
Wiring - refer to the manual supplied with the product
Summary of Contents for TIXIT
Page 11: ...11 x2 x2 M4x10 2 5 ASSEMBLING THE REAR GUARD I n s t a l l a t i o n...
Page 12: ...12 2 1 3 4 F C O I n s t a l l a t i o n WIRING SOLAR VERSION WI KEY OPTION...
Page 14: ...14 2 1 3 4 I n s t a l l a t i o n WIRING SOLAR VERSION OPTION...
Page 28: ...28 U s e LOCKING AND RELEASING PUSH LOCK Locking Releasing...