Del ozone AGW-4015, Owner'S Manual

Page: 4 / 25

AGW-4015/4025/4045 Skid-Mounted Ozone Sanitation Systems
1
SECTION 2
Installation
2A. Location
The AGW-4015/4025/4045 skid is designed to be
con ve nient ly forklifted to a location close to your pro-
cess. This can be a level lo ca tion indoors or covered
out doors. Al low for access to electrical power and
required water con nec tions.
2B. Electrical
Main Power Supply Circuit:
The AGW-4015/4025/4045 is sup plied with a stan dard
25 Foot power cord. Plug cord into standard 230VAC (20
Amp) grounded re cep ta cle.
2C. Plumbing
Water Inlet Connection: 1.25” FPT
Water Outlet Connection: 2” FPT
SECTION 3
System Confi guration/Installation Diagrams
The following 3 pages include diagrams for the fol low ing:
• Tank Charging System
• Tank Cleaning System
• Spray System
Figure 1: AGW-4015/4025/4045
Skid-Mounted Ozone Sanitation System
SECTION 1
General Information
1A. Description
The DEL AGW-4015/4025/4045 described in this
manual re cir cu lates ozone-enriched water through
tanks sized from 50 gallons to 2,500 gallons. It is de-
signed to "charge" a given tank of water with ozone for
safe and effective clean in place (CIP) and clean out
of place (COP), direct contact on food products, and
general water sanitation/disinfection.
1B. Specifi cations
Ozone Output,
g/hr
4015 4025 4045
15 25 45
Ozone Flow (max),
scfh
13 18 30
% Weight 0
3
4.2 4.2 4.2
Applied dose (ppm)
@ Flow (gpm)
3.2@20 3.2@35 5.5@35
Power Requirements:
230VAC, 60 Hz, 1Ø, 15.0 A (20 Amp Service)
Water Flow Rate: AGW-4015: 20 GPM factory preset
AGW-4025: 35 GPM factory preset
AGW-4045: 35 GPM factory preset
NOTE : The pur pose of the pump in the AGW-
4015/4025/4045 is to provide the proper pressure and
fl ow rate for the most effi cient in jec tor operation. It is
designed to cir cu late cold water only.
The inlet of the
AGW-4015/4025/4045 should never be con nect ed
directly to a pressurized water source and the outlet
should never be throttled or restricted. Please call
DEL if further explanation is re quired
.
Water Requirements:
Temperature: ........... 40°F - 90°F
Pressure: .............. 0 - 10 psi
Water Quality: potable, mineral & chemical free water
NOTE: Water passing through the AGW-4015/4025
cools the ozone generator module. Ozone ef fec tive-
ness, gen er a tor ef fi cien cy and service life will be
improved at water tem per a tures of 60 - 80°F.
Overall Dimensions: 64”H x 32”W x 28”D
Shipping Weight w/Crate: Approx. 500 pounds
Dry Weight: Approx. 450 pounds
Ambient Temperature:
Operation: Ambient Temperature 40°F - 100°F
WARNING: Not to exceed 100°F or damage to
system may result!
Op