Instruction manual for spiral mixer mod. CPM80-200
6.3
Spiral mixer model CPMel
The CPMEL model can control the machine functions through programmable
settings. It can also control the Water Doser and the Thermic probe according to the
sett
s
When reading this paragraph, refer to picture 5.2 on pag.24
nd urn the main on-off
switch to position “I”.
Be sure that the protection grid (fig. 2.1 at pag.13) is lowered onto the
.3.1
TECHNICAL CHARACTERISTICS
Soft are
SMDO.01a
Wa
i
Maxim
55° C
aximum entry water pressure
5 bar
Minimum entry water pressure
1 bar
Maximum
dosing
999,9
l
Dosing
precision
±1%
1 bar
25 l/min.
Water d iv
55 l/min.
Tension
Frequency
Pow r
10 VA
6.3.2
DOSER, INSTALLATION
In case of hard water ( high percentage of calcium ) it is advisable to use a water
softner. This equipment must be programmed in order to leave a residual hardness of
approximately 5 to 10 french centigrades.
6.3.3
DOSER, INSTRUCTIONS FOR USE
•
Press the button : the display 1 flashes.
•
Through the
program the desired quantity of water, this
will appear on the display 1..
•
Press the button : the valve opens automatically and the dosing starts.
•
It is possible to stop water outlet in any moment pressing the button
The display will show the quantity of water discharged; it is sufficient to press the
button to finish the discharge.
ing programmed by the user.
•
Connect the feeling cable to the electric connection a t
•
Be sure the emergency button is not pressed.
18
•
bowl
6
2
w
ter nlet
1/2
"
um entry water temperature
M
Water delivery at
el ery at 5 bar
12V
C.A.
50/60
Hz
e
buttons
28
