Deitz Pharmafill NB1, Operation Manual

Page: 17 / 87

2022-03-08 Pharmafill Model NB1
Deitz Company Inc. NB1 User Manual Page 11
Section 6 – INSTALLATION AND COMMISSIONING (cont’d)
5. Integrate the assembled NB1 Neck Bander to the conveyor
a. Use the hand crank on the lift stand to raise the machine high enough to clear the conveyor and
conveyor guide rails. 10 turns = 1
” (2.54cm).
b. Position machine next to the conveyor. Visually locate the blue suction cup under the knife.
c. Adjust the Conveyor Alignment Bars so that they hook underneath the conveyor body. Tighten the
mounting screws on the lift stand. (Note: The standard bars are made for a conveyor that is 5-1/2
“wide .
Contact Deitz Company if you require a different size.) The blue suction cup is now directly over the
center of the conveyor belt and the machine is parallel to the conveyor
d. Loosen the black handle on the left (below the control panel) and swing down the optical start sensor
assembly a few inches so you can access it. Re-tighten the black handle. For now,
we don’t care where
the black handle is positioned in the adjustment slot.
SUCTION CUP
HAND CRANK
START SENSOR
ADJUSTMENT
CONVEYOR
ALIGNMENT BARS