Deitz Pharmafill NB1, Operation Manual

Page: 10 / 87

2022-03-08 Pharmafill Model NB1
Deitz Company Inc. NB1 User Manual Page 4
Section 4 - SPECIFICATIONS (Also see technical information at end of manual)
GENERAL
Model NB1 Neck Bander
Type AD1178 REV A
Product Capability All heat-shrinkable materials intended for tamper evident neck banding
Minimum lay flat width (LFW): 25 mm (.98 in.)
Maximum lay flat width (LFW): 123 mm (4.84 in.)
Minimum length of band after cutting: .70 in (18 mm)
Maximum length of band after cutting: 9.99 inch (253 mm)
Roll Specifications Core Diameter 5” (12.7cm) Maximum O.D. 17” (43.2 cm)
Maximum Rate up to 100 applications/minute
INPUTS
Voltage 110 VAC
1
(Optional 220VAC)
Cycles 50/60 HZ
Phase 1
Amperage 2.0A
Compressed Air
2
0.5 CFM at 80 psi (14 LPM at 550 kPa)
Room Humidity 85% RH non-condensing
DIMENSIONS
Floor Footprint 28 ” wide x 2 9” deep ( 71cm X 74cm)
Height
3
Standard Variable 56 ” to 68 ” (14 2cm to 173cm)
Tall Variable 64” to 76” (162cm to 193cm)
Container Height Standard f rom 1” to 10 ” (2.5cm to 2 5cm)
3
Tall from 9” to 18” (23cm to 46cm)
Weight Fully assembled: 90 lbs (42 Kg)
Bander Unit alone: 45 lbs (21 Kg)
Lift Stand with Spacing Wheel: 45 lbs (21 Kg)
OTHER
Ideal Conveyor Height
36” +/ - 1” (92cm +/ - 2.5cm)
Construction Materials Stainless Steel (303, 304), Anodized Aluminum, Acetal, Polycarbonate
Notes:
1. Other input voltages are available as factory options if specified at the time of order
2. Compressed air must be clean and dry, free of impurities, moisture (water) and oil.
3. May be adjusted further by adjusting or modifying leveling feet.