4.11.1 More settings
Views or configures the additional settings for the display.
09/05/2019 - 12:46:16
DEIF
24 %
96 %
255 h
Screensaver
Start / stop buttons on home
screen
AOP page shortcut on home
screen
USA Tier4 compliance
Clock master
Breaker buttons on home
Parameter page shortcut on
Auto jump to sync scope
home screen
screen
Master / slave controller
manual switch
TDU 107
1
11
10
9
3
4
5
2
7
8
6
No.
Item
Use
Notes
1
Return
Returns to previous display.
2
Settings
-
Toggles on or off additional settings.
or
Setting enabled.
or
Setting disabled.
3
Screensaver
or
Enables or disables the screensaver.
4
Start / Stop buttons
or
Shows or hides the start / stop buttons on the home page.
5
AOP shortcut
or
Shows or hides the AOP button on the home page.
6
Tier 4 compliance
or
Enables or disables the Tier 4 compliance.
Enable this to automatically display the Exhaust After-treatment Dashboard if an
alarm becomes active.
7
Master/slave
controller manual
switch
or
Enable
: There is a redundant AGC.
•
Buttons on the
Home
page show whether the master or slave AGC is the active
controller.
•
You can select the master and slave AGC IP addresses on the
Setup > Connect
to Controller > Communication settings
page.
Disable
: There is no redundant AGC.
8
Auto jump to sync
scope
or
Enables an automatic jump to the synchronisation scope when a breaker is
synchronising.
After synchronisation the page automatically returns to the control panel.
9
Parameter shortcut
or
Shows or hides the Parameter button on the home page.
10
Breaker buttons
or
Shows or hides the breaker buttons on the home page.
11
TDU 107 clock
master
Select the master clock for the system.
OPERATORS MANUAL 4189341218F EN
Page 33 of 40
