3.3
Software update using USB
3.3.1
Before you begin
You can update your TDU 107 with the latest software version by using the USB port.
More information
See
Core connections
or
Extended connections
for more information about the location of the USB port on the display.
To update your TDU 107, you need the following:
Required tools
•
USB drive (FAT32)
◦
To import/export the file(s) to your PC and TDU 107.
◦
Must be formatted for FAT32 file system to be recognised by the TDU 107.
•
PC
◦
To download the software package file.
◦
To copy the software package file to the USB drive.
3.3.2
Download and update software
1. Visit the DEIF homepage
https://www.deif.com/products/tdu-107#software
to download the latest version.
•
Software is available for both
TDU 107 Core
and
TDU 107 Extended
.
•
Download the software for your version of the TDU 107.
2. Follow the instructions in the DEIF email to complete the software download.
3. The software package is provided as a zipped archive (.zip) file. Do not unzip this file.
4. If the old software in the TDU has a version number lower than 1.3.7, rename the zip file "UpdatePackage..." (
U
and
P
must be
capital letters).
•
For example, if the zip file is "updatepackage_1-3-7-0_pdb7310.zip", rename it "UpdatePackage_1-3-7-0_pdb7310.zip".
5. Copy the zip file to your USB drive.
6. Insert the USB drive in the USB port on your TDU 107.
7. The TDU 107 detects the update package. Select
Confirm
to start the update.
8. Select
Confirm
to restart the TDU 107.
9. After the TDU 107 restarts, select
Startup sequence
.
10. Select
Install
.
11. Double tap the folder
Mnt
, then double tap the folder
usbmemory
.
12. Select the update package and select
OK
.
13. The TDU 107 installs the update.
14. To complete the configuration, select
Continue
.
15. Select
Done
, then select
Start HMI
.
16. The TDU 107 restarts.
17. Remove the USB drive from the TDU 107. The TDU 107 is now updated and ready to use.
OPERATORS MANUAL 4189341218F EN
Page 16 of 40
