2. Highlight the required
user
by pressing
Up
or
Down
.
3. Select the highlighted
user
by pressing
OK
.
•
The
virtual keyboard
is displayed on screen.
•
You must enter the
password
for the selected
user
.
•
Or you can cancel the log on by pressing
Back
to return to the previous list of users.
4. Enter the
password
by using the virtual keyboard.
•
See
Using the display unit
,
Introduction
,
About the virtual keyboard
for more information on how to use the
keyboard and layouts.
5. Select
Log on
Log on
.
•
If the password is correct, you are logged on as the new user.
◦
The
Home
menu is then displayed on screen.
◦
◦
A logged on icon is shown in the top right of the display (1).
•
If the password is entered in incorrectly, the following message is displayed:
◦
◦
The message automatically closes after a couple of seconds, or you can press
OK
.
◦
To attempt to log on again, continue again from step 2 above.
INFO
You do not need to log off a user to log on as different one. You can simply log on as the new user.
6.3 Log off
6.3.1 Log off from controller
Log off from the display under
Log on
.
OPERATOR'S MANUAL 4189341099G UK
Page 27 of 130
