AL8-2 – Programming manual
4189320003D
Page 3/19
On delivery, the AL8-2 alarm panel is programmed to the following functions:
Individual functions
•
Alarm on
closed
signal contact (N/O)
•
No
activation of output relays A and B on an alarm condition
•
Inhibit function
NOT
activated
•
No
alarm on cable failure
•
Immediate
registration of an alarm condition (i.e. time delay 0 sec.)
Common functions
•
Output relays A and B
activated
on an alarm condition (N/O)
•
Duration of activation is
unlimited
(i.e. time limit 0 sec.)
•
No
delay of cancellation of inhibit function (i.e. time delay 0 sec.)
BEFORE YOU START PROGRAMMING
Programming the DEIF alarm panel AL8-2 requires only few and simple preparations:
Firstly, auxiliary voltage should be connected (indicated by green light in the LED
marked "POWER ON").
CONNECTIONS
