AL8-2 – Programming manual
4189320003D
Page 12/19
If changing of the just entered function is not requested, press
CHANNEL SELECT
to
step through the channels to find the next to be programmed.
You may also terminate the programming by pressing
PRG
, resulting in the alarm panel
returning to normal function. If PRG is pressed, the LED for "PRG" and the LED for the
channel just pointed to are switched off, and the LED for "DELAY OF ALARM" indicating
"POWER ON" is lit (green light).
If delayed registration of an alarm condition was selected (the LED for "DELAY OF
ALARM" is lit with green light), the requested time delay is to be programmed now. The
time delay can be set within the range 0..40 secs at intervals of 1 sec.
SELECTION OF REQUESTED TIME DELAY (SET TIME)
When the function "delayed registration of an alarm condition" has been entered by
pressing
ENTER
(i.e. LED for "DELAY OF ALARM" is lit with green light), the LED for
"SET TIME" is lit (green light) and the LED for "DELAY OF ALARM" continues being lit
(green light).
The requested time delay is programmed by first selecting a "basic time" and then an
"additional time".
The BASIC time
is indicated by the LEDs marked 1-10.
The ADDITIONAL time is indicated by the LEDs 10 and +20
(N/O and N/C LED respectively).
